Ht-instruments MACROTEST G3 Uživatelský manuál stáhnout pdf (Strana 41)

MACROTESTG3 - COMBIG3

EN - 40

Touch the icon to zero the value in the In field and

use the virtual keyboard to set the value of the RCD

rated current within the values allowed by the

instrument.

The following selections are available on the instrument

 MCB current (B curve) selectable among:

6,10,13,15,16,20,25,32,40,50,63A

 MCB current (C, K curves) selectable among:

0.5,1,1.6,2,4,6,10,13,15,16,20,25,32,40,50,63A

 MCB current (D curve) selectable among:

 0.5,1,1.6,2,4,6,10,13,15,16,20,25,32A

 Nominal current Fuse gG selectable among:

2, 4, 6, 8, 10, 12, 13, 16, 20, 25, 32, 40, 50, 63, 80,

100, 125, 160, 200, 250, 315, 400, 500, 630, 800,

1000, 1250A

 Nominal current Fuse aM selectable among: 2, 4, 6,

8, 10, 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125,

160, 200, 250, 315, 400, 500, 630A

Confirm the choice by going back to the previous

screen.

Touch the icon in the bottom right corner to set the

type, section and material forming the inner insulation

of the cable of the line under test. The following screen

appears on the display:

Touch the “mm

” field and, by using the virtual

keyboard, set and confirm the section value of the

single cable free selectable

Touch the field “

”and, by using the virtual keyboard,

set and confirm the possible number of parallel cords.

In the case that the circuit have only one conductor set

the “1” value

Move the central slide bar reference by selecting the

type of conductor. The available options are Cu

(Copper) and Al (Aluminum).

Move the right slide bar reference by selecting the

insulation type of the cable between the options: PVC,

Rub/Butil (Rubber/Butyl rubber) and EPR/XLPE

(Ethylene propylene rubber/Cross-linked polyethylene)

Confirm the choice by going back to the initial

measurement screen.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 107 108

Komentáře k této Příručce

Žádné komentáře

Ht-instruments MACROTEST G3 Uživatelský manuál Strana 41

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Ht-instruments MACROTEST G3