Ht-instruments MACROTEST 5035 Uživatelský manuál stáhnout pdf (Strana 60)

MACROTEST 5035

EN - 59

7. INSTRUMENT CONNECTION TO A PC

The connection between PC and instrument is realized through the serial port and optical

serial cable, provided with the software package.

Before effecting the connection it is necessary to select the COM port used for the

transmission. To set this parameter start the software and look up the help on line.

ATTENTION: The selected port shall NOT be shared by other devices or applications

(example mouse, modem, etc.)..

To transfer the stored data from the instrument to the PC keep to the following procedure:

1. Turn the switch on position RS232.

2. The item "Ser" appear at display as shown in herewith picture.

Then proceed according to the software instruction manual to transfer the

measurements effected.



The communication between

instrument and PC occurs.

Note: The right download speed is: 9600 baud (see software instruction manual).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 79 80

S.imoim.net 04 Dec 2024 | 14:11:18

Text and images you copy will automatically show hereText and images you copy will automatically show here

Ht-instruments MACROTEST 5035 Uživatelský manuál Strana 60